FAQs

    1. Open the stem clamp.
    2. Press in the stem adjustment pin and lift (or lower) the Handlebar.
    3. Once adjusted to your desired height, make sure the stem pin is lined up through the guide holes.
    4. Tighten and close the stem clamp.

    CAUTION: The stem pin will not keep the stem secure, please male sure the Stem Clamp is tightened and closed prior to riding.

    1. Slide down the stem release towards the front of the scooter.
    2. While holding the stem release down, raise the stem into the upright position.
    3. The stem will be secured in the upright position once you hear the stem release click back into place.