FAQs

  • To change the desk and stem lights on your Jetson Glow scooter, press the LED Light button, located on the bottom, left of the scooter's deck. There are 3 light settings that can be accessed by clicking the button.

  • To charge your Glow scooter, simply plug the charger into a working wall outlet. Next, plug the charger into the charging port located on the bottom, left of the scooter's deck. When charging, the indicator light on the charger will display red and turn to green/blue when fully charged (no longer than 4 hours).

  • To start your Glow scooter, ensure that the power switch is turned on and the deck lights illuminate. Next, kick start your scooter using one foot to push scooter forward for about 5-8 kicks to before clicking the throttle. Note: Motor will only engage if scooter wheels are moving at 3-4mph. To stop, release the throttle and apply hand and/or foot brake.