• The Tempo scooter handlebar height stands about 33 inches tall and cannot be adjusted.

  • The Tempo scooter weighs about 17 lbs when fully assembled.

  • The Tempo scooter is designed for kids ages 8+ and can handle loads of up to 120 lbs.

  • To charge your Tempo ensure that the power switch is turned to the on position. Next, insert the AC adapter end into a wall outlet (the light on the charger should be green). Then plug the charger into the charger port on the unit, and light should turn red (indicating charging). Once charge is complete, charger light will turn green (may take up to 5 hours).

  • To start your Tempo ensure that power switch is turned on and lights up red. Next, kick start your scooter using one foot to push scooter forward for about 5-8 kicks before clicking the throttle. Note: Motor will only engage if scooter wheels are moving at 3-4mph. To stop, release throttle and apply foot brake.

  • If your scooter looses power during use, or power switch is not illuminated, you may need to reset your device.

    1. Place the Tempo on a flat, level surface and turn power off for about 5 minutes.
    2. Press the Reset Button in.
    3. Restart the Tempo by turning it off and then on.


  • The Jetson Tempo is motion activated. Simply push forward with one foot consecutively for 5-8 kicks before engaging the throttle.