First fold the handlebars of your Jetson E-Pocket by lifting both folding Buttons on the handlebar. Bring the Handles in towards each other until they lock into place.
Make sure your kickstand is upright. Then, loosen the folding lever underneath the deck and lift the Rear Wheel up, towards the top of the scooter deck. The rear half of the deck should rest flat on the front half of the Deck.
Lastly, lower the handlebar all the way. Then, loosen the folding lever at the base of the stem by turning it counter-clockwise. Do not loosen this folding lever all the way, just enough so you can lower the stem. Lower the handlebars and stem down. Secure with the stem clip.
The serial number of your Jetson E-Pocket scooter is located on the very bottom of the scooter deck. You will see your E-Pocket serial number on a black sticker with the Jetson Electric logo on it.
To turn the Jetson E-Pocket lights on, click and hold the Power Button for about 1 second. One click will turn the Lights on. Another click will turn the Lights off.
To turn the Jetson E-Pocket on, first make sure the Power Switch under the Deck is on. Then, press and hold the Power Button for 3 seconds.