First fold the handlebars of your Jetson E-Pocket by lifting both folding Buttons on the handlebar. Bring the Handles in towards each other until they lock into place.
Make sure your kickstand is upright. Then, loosen the folding lever underneath the deck and lift the Rear Wheel up, towards the top of the scooter deck. The rear half of the deck should rest flat on the front half of the Deck.
Lastly, lower the handlebar all the way. Then, loosen the folding lever at the base of the stem by turning it counter-clockwise. Do not loosen this folding lever all the way, just enough so you can lower the stem. Lower the handlebars and stem down. Secure with the stem clip.